On any IP Camera
Notifications at any time
AI based wildfire detection
Sen-Eye augments any type of IP camera with an AI capable of detecting emerging wildfires by scanning the camera's images for smoke plumes.
Throug our Sen-Eye dashboard you can
Sen-Eye can be installed anywhere no power nor connectivity required. It does so by using solar panels and satellite communications.
Login to Sen-Eye dashboard
Add your IP camera in the dashboard (for free)
Set up notifications
Activate Sen-Eye license
RequirementsFor the deployment of Sen-Eye Edge, dedicated Sen-Eye hardware is needed. This hardware is included in the Sen-Eye Edge subscription. An IP camera is also required (not included in license offering).
Installation steps:● Step 1: Mount IP camera and Sen-Eye hardware to installation point● Step 2: Connect IP camera to Sen-Eye hardware via the provided cable● Step 3: Connect power and internet cable to Sen-Eye hardware (optional if solar panel and satellite communication module is chosen) ● Step 4: Configure Sen-Eye dashboard and camera
Following features are embedded in the Sen-Eye dashboard:
€ 2500 /Yearor €250 /month
Cost/image outside license: €0.10
€ 3500 /Yearor €350 /month
Cost/image outside license: €0.08
€ 4500 /Yearor €450 /month
Cost/image outside license: €0.05
Senhive is founded, supported by investor seed capital.
Senhive is granted an ESA BIC fund for the development of their product range.
Start proof of concept Sen-Eye at nature park "Hoge Kempen" in Belgium. Our system was installed on a manned watchtower and detected a prescribed fire based on it's smoke plume.
Finalization of first (and successful) test of our wildfire detection AI at park "Hoge Kempen".
Development of our Sen-Eye dashboard, needed to interact with the camera and the alerting service.
In the meantime our fire detection AI has been successfully proven on several manned fire watchtowers. However, on request of Europe's national nature park authority, we will conduct one more final test on a manned watchtower in September 2021.
In October 2021, the start of the South-African wildfire season, we are planning to release the cloud-model of our Sen-Eye solution. Our Cloud solution will enable large scale deployment of wildfire detection systems by providing an easy to use, reliable and low cost wildfire detection system.
In order to further accommodate scalability and deployment options, we will be releasing a hardware augmented solution, capable of off-grid deployment in beginning of 2022.